As a result, we deliver factory-direct pricing, consistent fiber quality, and fast delivery. Similarly, this applies to all your furnace, kiln, boiler, and high-temperature equipment lining projects.
In addition, we produce these needle-punched ceramic fiber blankets in standard 1260°C, high-purity 1260°C, high-alumina 1360°C, and zirconia 1430°C grades. Meanwhile, we comply with ASTM C892, EN 1094-1, and ISO 10635. Therefore, engineers and contractors rely on them for thermal insulation, expansion joints, and backing insulation in the most demanding high-temperature environments.
Technical Specifications of Ceramic Fiber Blankets
To begin with, we manufacture our ceramic fiber blankets in a range of grades, densities, and thicknesses. Specifically, the table below summarizes the standard product range.
| Grade | Classification Temp. | Al2O3 (%) | ZrO2 (%) | Density (kg/m³) | Typical Application |
|---|---|---|---|---|---|
| Standard | 1260°C | 46 – 48 | — | 96 / 128 | Furnace backup insulation, expansion joints |
| High Purity | 1260°C | 47 – 49 | — | 96 / 128 | Kiln linings, reformer insulation |
| High Alumina | 1360°C | 52 – 55 | — | 128 / 160 | Boiler insulation, high temperature gaskets |
| Zirconia | 1430°C | 39 – 40 | 15 – 17 | 128 / 160 | Severe high temperature furnace linings |
Material & Physical Specifications for Ceramic Fiber Wool
- To begin with, we use high-purity alumina-silicate raw materials as the base for our ceramic fiber blanket. The fiber is produced by melting and blowing or spinning, then needle-punched to form a flexible blanket.
- Moreover, our standard blanket has a density of 96 kg/m³ or 128 kg/m³. We also supply 160 kg/m³ for higher mechanical strength requirements.
- Additionally, we manufacture standard thicknesses of 6 mm, 10 mm, 12.5 mm, 20 mm, 25 mm, and 50 mm. Custom thicknesses are available on request.
- Furthermore, standard roll dimensions are 610 mm × 3600 mm and 1220 mm × 7200 mm. We also supply 610 mm × 7200 mm and custom cut lengths.
- For special orders, we supply aluminum foil faced and wire mesh reinforced ceramic fiber blankets for enhanced surface protection.
- Finally, we offer OEM & ODM — we customize density, thickness, width, length, temperature grade, and packaging according to your specifications.
Why Choose Our Thermal Ceramic Fiber Blankets?
In fact, ceramic fiber blanket is the industry standard for high-temperature insulation because it offers low thermal conductivity, low heat storage, and excellent thermal shock resistance. Furthermore, it is lightweight and easy to cut and install.
- First, our blankets offer low thermal conductivity. This reduces heat loss and improves energy efficiency in furnaces and kilns.
- Second, they provide low heat storage. The low density means less heat is absorbed by the lining, allowing faster heat-up and cool-down cycles.
- Third, they deliver excellent thermal shock resistance. The flexible fiber structure withstands rapid temperature changes without cracking.
- Fourth, they ensure high tensile strength. The needle-punching process gives the blanket good handling strength and resistance to delamination.
- Finally, they provide excellent chemical stability. They resist most chemicals and are not affected by oil or water.
Applications & Industries for Ceramic Fiber Blankets
- For instance, in industrial furnaces, our blankets provide backup insulation and hot face lining for temperatures up to 1430°C.
- Also, in kilns and boilers, they insulate walls, roofs, and doors to reduce heat loss and improve energy efficiency.
- In addition, for expansion joints, they fill gaps and accommodate thermal movement in refractory linings.
- Furthermore, in reformers and petrochemical heaters, they insulate high-temperature piping and equipment.
- Lastly, in ladles, tundishes, and molten metal transfer, they provide thermal protection and reduce heat loss.
About Our Factory — Direct Manufacturer of Thermal Ceramic Fiber Blankets
In fact, Tarco Industry operates a modern manufacturing facility. Specifically, we dedicate it to the production of ceramic fiber blankets and high-temperature insulation products.
Furthermore, we complete every step in our own factory. This includes raw material melting, fiber blowing, needle punching, heat treatment, and packaging. Consequently, we do not outsource production. We do not act as a middleman.
In addition, we equip our factory with advanced melting furnaces and automated needle-punching lines. As a result, we produce high-quality ceramic fiber blankets with consistent fiber diameter, uniform density, and reliable thermal performance.
Therefore, whether you need standard 1260°C or zirconia 1430°C blankets, Tarco Industry can produce them directly for you.
Factory Direct Advantages
- First, we are a Manufacturer, Not a Trader. You buy directly from Tarco Industry production lines, eliminating middleman markups.
- Second, we handle In-House Production. We produce fiber, blankets, and finished insulation all under one roof for full quality control.
- Third, we welcome OEM & ODM. We customize density, thickness, width, length, temperature grade, and packaging.
- Fourth, we maintain Bulk Production Capacity. We ensure stable output for large furnace and kiln projects.
- Finally, we provide Factory Price. We offer competitive direct pricing for distributors, refractory contractors, and OEMs.
How to Install Ceramic Fiber Blankets
- First, prepare the surface. Clean the furnace or kiln shell to remove dust, oil, and loose material.
- Then, cut the blanket. Use a sharp knife or scissors to cut the blanket to the required size. The blanket is soft and easy to cut.
- Next, attach the blanket. You can impale the blanket onto ceramic anchors, or use a high-temperature adhesive. For hot face applications, use ceramic fiber modules or anchors.
- After that, compress the blanket. Apply slight compression at joints to ensure a tight seal and prevent heat leakage.
- Finally, secure the blanket. Use stainless steel wire, ceramic rope, or mechanical fasteners to hold the blanket in place.
Quality Assurance & Certifications
Furthermore, Tarco Industry manufactures our ceramic fiber blankets under strict quality control. Specifically, they comply with ASTM C892, EN 1094-1, and ISO 10635 standards.
As a result, we perform density testing, tensile strength testing, thermal conductivity testing, and chemical composition analysis. Moreover, we test every production batch before shipment.
- Additionally, we offer certifications including ISO 9001, CE, and SGS.
- Similarly, our production capacity reaches 500 tons per month.
- Also, we set the MOQ at 1,000 kg (negotiable for sample orders).
- In terms of packaging, we offer plastic bags inside cartons or woven bags, on pallets with custom marking.
- Finally, we deliver within 15–20 business days after order confirmation.
Request a Quote for Thermal Ceramic Fiber Blankets
In conclusion, we are Tarco Industry. We are a direct manufacturer of thermal ceramic fiber blankets and high-temperature insulation wool.
Therefore, because we produce in our own factory, we offer competitive factory-direct pricing. In other words, you deal with no middleman and no trading company markup.
📩 Contact Tarco Industry now for a free sample or bulk quotation. Additionally, our engineering team can assist you in selecting the right grade, density, thickness, and packaging for your specific furnace or kiln application.
Tarco Industry — We Produce, We Manufacture, We Supply Directly.
